What is your determine factor as to when to use a V cutter over a guillotine or punch and can you recommend a good V cutter. I like the looks of both Colibrí and Xikar.
Why the Xikar XV of course can even find them on C-Bid
QuoteCfickter - 8/12/2018 4:40 PM
Why the Xikar XV of course can even find them on C-Bid
Thanks Chuck. I am pretty decided on Xikar.
QuoteChefjohn - 8/12/2018 2:05 PM
What is your determine factor as to when to use a V cutter over a guillotine or punch and can you recommend a good V cutter. I like the looks of both Colibrí and Xikar.
For curiosity reasons. Why do you want to use a V-Cut over a straight cut?
Quote05Venturer - 8/12/2018 5:07 PM
QuoteChefjohn - 8/12/2018 2:05 PM
What is your determine factor as to when to use a V cutter over a guillotine or punch and can you recommend a good V cutter. I like the looks of both Colibrí and Xikar.
For curiosity reasons. Why do you want to use a V-Cut over a straight cut?
Really just to have a choice Kent. I thought that with some of the 5'ers I bought I might try a V cut on one or two of the sticks to see the difference.
I have a Xikar. real happy with it. still working after 5 years.
Colibri
My Xicar v-cutter was my go-to for years, but lately I've turned to the regular guillotine cutter. For some time I'd use the v-cutter, and if the draw wasn't quite right, or if there was tar build up or other issues, I'd use the guillotine cutter and keep on going.
QuoteMautrak - 8/12/2018 8:52 PM
My Xicar v-cutter was my go-to for years, but lately I've turned to the regular guillotine cutter. For some time I'd use the v-cutter, and if the draw wasn't quite right, or if there was tar build up or other issues, I'd use the guillotine cutter and keep on going.
^^^ I tried several V and Punches but always go back to by Xikar guilltoines, the small cut I get with a V or punch both seem to concentrate the tars into the smaller area. My cigars always seem to smoke better with a straight cut. JMO
Xikar....lifetime warranty.
I like the v cut on belicosos and torpedoes etc...You cannot go wrong with the Xikar...let me repeat that....you cannot go wrong with the Xikar...I personally have a Colibri...The Colibri V Cut is a great cutter. I bought it over the Xikar for 2 reasons...Price.....and I really liked the deeper cut...I usually stick with a straight cut with most other shapes...But I am very happy with my Colibri
Thanks for the recommendations guys.
I use the Xikar VX2 V-Cut. It works great.
https://www.xikar.com/products/cutters/vx2/